ESS HY 3.6 kW
3.6 kW5 / 8 kWh25.6 V
Nominal energy: 5 kWh / 8 kWh
Usable energy (90% DOD): 4.5 / 7.2 kWh
Product size: 440 × 246 × 760 mm
US STANDARD ALL-IN-ONE SYSTEM
Integrated inverter, BMS and LiFePO4 battery solutions for 120/240 VAC applications. The American standard inverter energy storage unit family covers compact backup and scalable residential energy-storage configurations from 3.6 kW to 12 kW.
CONFIGURE YOUR STORAGE
Select the published power and energy range that matches the planned installation. Final compatibility, local code compliance and project design should be confirmed before ordering.
SYSTEM OVERVIEW
An American standard inverter energy storage unit combines the inverter, battery-management system and battery pack in one installation-oriented product. The published family uses 25.6 V battery options in the 3.6 kW and 4 kW configurations, while the 7.2 kW and 12 kW configurations list 51.2 V battery platforms.
PV input, AC input and AC output values vary by model. Use the table below as a source-derived comparison, not as a replacement for a site electrical design. YINEN can review your inverter model, PV plan, energy target, location and quantity before a configuration is selected.
TECHNICAL DATA
| Model group | 3.6 kW | 4 kW | 7.2 kW | 12 kW |
|---|---|---|---|---|
| Nominal energy | 5 / 8 kWh | 5 / 8 kWh | 10.24 / 16.07 kWh | 16 / 21 / 32 kWh |
| Battery nominal voltage | 25.6 VDC | 25.6 VDC | 51.2 VDC | 51.2 VDC |
| PV input capacity | 4500 W | 5000 W | 4500 W + 4500 W | 6000 W + 6000 W |
| Open-circuit PV voltage | 500 VDC | 500 VDC | 500 VDC | 500 VDC |
| Rated AC input | 120 VAC ±5% | 120 VAC ±5% | 120/240 VAC | 120/240 VAC |
| Maximum efficiency in battery mode | 91% | 92.6% | 91% | 91% |
| Ingress protection | IP20 | IP20 | IP20 | IP20 |
| Operating voltage range | 21.6–29.2 VDC | 21.6–29.2 VDC | 43.2–58.4 VDC | 43.2–58.4 VDC |
Values above are transcribed from the supplied product manual pages 19–23. Product dimensions, parameters and container-loading quantities in the source are stated as subject to the latest documentation.
APPLICATIONS
Application suitability depends on site load, PV array, electrical connection, installation space and backup requirements. Review these inputs before specifying a system.
Coordinate PV input, daily energy target and the selected battery energy range for a household solar-storage plan.
Identify priority circuits, expected backup duration and location conditions for a practical configuration discussion.
The supplied 7.2 kW and 12 kW materials list parallel connection support up to six units; confirm the project design before implementation.
For broader residential storage options, visit YINEN POWER energy storage solutions. For independent energy context, see the IEA battery report.
COMMON QUESTIONS
Start with the expected load, daily energy target, PV plan, installation position and destination requirements. The published family ranges from 3.6 kW / 5 kWh to 12 kW / 32 kWh.
The supplied product pages list PV charging, AC charging and grid feed-in for the series. Confirm the final design and electrical requirements for the actual project.
The source data lists 120 VAC input for 3.6 kW and 4 kW groups, while the 7.2 kW and 12 kW groups list 120/240 VAC input. Verify the site connection before selection.
USB, RS485 and WiFi monitoring are listed in the supplied materials. Model-level implementation should be confirmed for the requested configuration.
Send the planned inverter or load information, PV array, energy target, site location, country and quantity. YINEN can then assess the suitable published model range.
PROJECT CONFIGURATION
Share your load, PV plan, installation location, destination country and quantity for a practical configuration review.
